Chapter · 1991
Material and Technical Characterization of Base Ring Ware: A New Fabric Typology
In Cypriot Ceramics: Reading the Prehistoric Record, 119-130. Philadelphia: Penn Museum
An article proposing a four-part fabric typology for Base Ring ware, built from sherds of 46 Cypriot sites, local clays and laboratory analyses.
Vaughan proposes a fabric-based classification of Base Ring ware that can be applied to sherds in the field, offered as a first step towards a wider reassessment of the ware. She argues that the Swedish Base Ring I and II scheme rests on overlapping, sometimes imprecise criteria and implies a linear development that the evidence does not support, so her alternative separates fabric from shape, decoration and chronology and lets each be examined on its own.
The sample is made up of sherds from excavations and survey collections, examined under the microscope on fresh fractures and then by thin section, geochemical analysis, X-ray diffraction, scanning electron microscopy and microprobe. Forty local clays were also collected, replicated and analysed (pp. 120–121).
Vaughan identifies four principal fabrics, distinguished mainly by manufacturing features, and six regional clay groups, and she associates the ware's consistency with production at a limited number of regional centres and specialist work. A separate Larnaca Bay fabric may represent a single workshop. The Swedish Base Ring I and II labels survive only as preliminary chronological guides for the samples, defined by shape, relief decoration and white paint, while her own scheme represents overlapping development rather than fixed chronological types, and the ware's production is discussed across roughly five hundred years.
What it records
- About 1,000 Base Ring sherds from 46 sites across Cyprus were analysed, 46% of them from excavated contexts.p. 120
- Base Ring ware was handmade, with turntables used extensively for secondary forming.p. 122
- Base Ring firings generally reached 750–850°C, except for the Red Burnished type and a Larnaca Bay fabric.p. 122
- Base Ring clays divide into six regional groups, among them groups tied to the Ovgos Valley and the Karpass.p. 123
- Samples of the separate Larnaca Bay fabric concentrate at Arpera, Klavdhia, Hala Sultan Tekke, Kalohorio and Aradhippou.p. 123
- Vaughan proposes replacing Roman numerals with the names of four major Base Ring classes: Metallic Slip, Red Burnished, Matte Slip and Uncoated.p. 126
Where to read
- Research design, sample sites and analytical methodspp. 120–121
- Fabric groups and regional production patternspp. 122–124
- Reclassification and chronological overlappp. 125–128
Contents
- Material and Technical Characterization of Base Ring Ware: A New Fabric Typology119
- Introduction119
- Research Design and Methodology120
- Attributes of Base Ring Ware in General121
- Material121
- Technology122
- Regional Patterns and the Fabric Typology122
- Regional Patterns122
- The Fabric Typology123
- Discussion of Results123
- Conclusions125
- References129
People, places and institutions
People
- Merrilleescriticised existing Base Ring categories
- Gjerstadearlier account of firing practice
Places
- Enkomisite cited for Base Ring finds
- Larnaca Bayarea of a distinct fabric
- Ovgos Valleyregion of one clay group
- Karpassregion of one clay group
Also named: Sjöqvist, Dikaios, Kalavasos, Hala Sultan Tekke, Arpera, Klavdhia, Kalohorio, Aradhippou, Myrtou-Pighades, Shechem, Bamboula, Phaneromeni.
Extent pp. 119–130, 2 figs
Defines Base Ring Ware, Base Ring Metallic Slip Ware, Base Ring Matte Slip Ware, Base Ring Uncoated Ware, Base Ring Red Burnished Ware
Late Bronze AgeMiddle Bronze AgePotteryTechnologyCraft ProductionChronology and Dating
Cited on Ancient Cyprus
3 pages · 4 objectsWho did what
1 recordRecording and study 1
- p. 126
Porphyrios DikaiosStudied
Dikaios found a long period of overlap in the occurrence of vessels classified as BR I and BR II at Enkomi.
vessels variously identified as BR I and BR II
Corrections and additions
Know this document?
Help us cite it fully and point readers to a copy.
We would like to hear about
- The full citation, or a correction to ours
- Where a copy can be read or downloaded
- Missing parts, volumes or plates
- Related documents
Tell us if you would like to be thanked by name on the page.