Article · 2002

On the structure and composition of copper and tin ingots excavated from the shipwreck of Uluburun

A. Hauptmann, R. Maddin and M. Prange

Bulletin of the American Schools of Oriental Research 328 1-30

An article on the structure and composition of the copper and tin ingots from the Uluburun shipwreck, and on how the metals were processed and cast.

Copper and tin ingots from the Late Bronze Age Uluburun shipwreck, whose sinking Hauptmann, Maddin and Prange give as c. 1300 BCE after Pulak, are studied through metallography and chemical analysis. The questions are the quality of the metals, how the ingots were made, and what their internal features can show about smelting, remelting and casting. The sections cover sampling and measurement, the metallography and chemical composition of the copper ingots, the same for the tin ingots, and conclusions.

The evidence

Surface or edge samples came from 151 copper ingots and drill cores from three oxide ingots, KW 1548, KW 2379 and KW 3695, and one bun-shaped ingot, KW 963. Mounted samples were examined under the microscope and the copper was analysed by optical emission spectrometry, with atomic absorption checks for selected elements. Thirty-two tin ingots were sampled by drilling, four specimens were prepared for metallography, and the tin was analysed by the same spectrometric method (pp. 3–4).

The copper shows cavities from micrometre to millimetre scale, angular iron-silicate slag inclusions, cuprite and in some cases copper sulfides, and microscopy tells cuprite formed in corrosion from inclusions that belong to production. Oxide and bun-shaped ingots are compared across trace elements. Corrosion crusts surround surviving metal in some of the tin, whose preserved matrix holds few inclusions (pp. 4–16).

The argument

Hauptmann and colleagues argue that the copper ingots were made in successive operations. Slag inclusions and sulfides preserve evidence of primary smelting, while cuprite and the porous, heterogeneous structure, with porosity locally of 20% or more, point to remelting in a separate vessel and in some cases to several pours. They propose that batches of copper were collected and remelted into larger ingots, possibly at settlements such as Enkomi. Trace-element concentrations are low, but slag, cuprite and sulfide inclusions remain, so the authors reject deliberate refining and judge the copper unsuitable for casting objects without further local processing. The tin is generally chemically pure, though most of the sampled ingots are heavily corroded (pp. 12–19).

What it records

  • The Uluburun ship carried ten tons of copper and one ton of tin.p. 1
  • The Uluburun wreck yielded 354 oxhide-shaped copper ingots and 121 intact bun-shaped ingots.p. 2
  • The Uluburun cargo included about 120 tin ingots and fragments, weighing about one ton.p. 2
  • A sample of 151 Uluburun copper ingots went to metallographic and chemical analysis.p. 3
  • Drill cores were taken from oxide ingots KW 1548, KW 2379 and KW 3695, and from bun-shaped ingot KW 963.p. 3
  • Porosity in the Uluburun copper ingots locally reaches 20% or more.p. 4
  • Hauptmann and colleagues read alternating dense and porous areas in ingot KW 1548/7b as possible evidence of several pours.p. 5
  • Corrosion left some Uluburun tin ingots with only a small metal core inside a thick crust, the authors report.p. 15
  • Thirty-two Uluburun tin ingots were chemically analysed.p. 16
  • Hauptmann and colleagues conclude that the Uluburun copper ingots were not deliberately refined.p. 18

Where to read

  • Sampling strategy and analytical methodspp. 3–4
  • Copper ingot porosity, slag and cuprite inclusionspp. 4–12
  • Copper composition, oxide and bun-shaped ingots comparedpp. 13–15
  • Tin ingot corrosion and chemical compositionpp. 15–17
  • Interpretation of copper remelting, refining and castingpp. 17–19

Contents

  • Introduction1
  • Sampling and Measurement3
  • Results and Discussion4
  • Metallography of Copper Ingots4
  • Chemical Composition of Copper Ingots13
  • Metallography of the Tin Ingots15
  • Chemical Analyses of the Tin Ingots16
  • Conclusions17
  • Acknowledgments19

Objects published here

4
  • Bun-shaped ingot with a drilled core showing voids, Museum of Underwater Archaeology in Bodrum, Uluburun shipwreck, KW 963, fig. 1 (p. 4)
  • Oxhide ingot with two handles and four drilled cores, Museum of Underwater Archaeology in Bodrum, Uluburun shipwreck, KW 1548, fig. 2 (p. 5)
  • Oxhide ingot with four handles and three drilled cores, Museum of Underwater Archaeology in Bodrum, Uluburun shipwreck, KW 2379, fig. 3 (p. 6)
  • Oxhide ingot with four drilled cores, Museum of Underwater Archaeology in Bodrum, Uluburun shipwreck, KW 3695, fig. 5 (p. 8)

People, places and institutions

People

  • Cemal Pulakexcavator of the Uluburun shipwreck
  • Tylecoteproposed ingot formation from smelting
  • Merkelproposed processes of copper remelting
  • Buddraised the possibility of scrap in ingots
  • N. H. Galediscussed lead isotope provenance work
  • Stos-Galereported lead isotope analyses
  • V. Karageorghisproposed bone ash deoxidation
  • Kassianidouproposed bone ash deoxidation

Institutions

  • Museum of Underwater Archaeology in Bodrumholds the ingot collection
  • Deutsches Bergbau-Museumplace of sample preparation and chemical analyses

Places

  • Uluburun shipwrecksource of the ingots analysed
  • Cape Gelidonyacomparison with another shipwreck cargo
  • Enkomipossible place of copper remelting
  • Kitionsite of copper-metallurgical remains
  • Sardiniacomparison for copper ingots and fragments
  • Feinancomparison for copper production
  • Timnacomparison for copper quality and production
  • Hishuley Carmeltin ingot comparison
  • Kefar Shamirtin ingot comparison
  • Haifalocation of comparative tin ingots

Also named: Kas, Nichoria, Olympia, Institute for Aegean Prehistory (INSTAP).

Extent pp. 1–30, 16 figs; bibliography

Late Bronze AgeEarly Bronze AgeRomanCopperTradeTechnologySeafaring

Cited on Ancient Cyprus

1 page

Corrections and additions

Know this document?

Help us cite it fully and point readers to a copy.

We would like to hear about

  • The full citation, or a correction to ours
  • Where a copy can be read or downloaded
  • Missing parts, volumes or plates
  • Related documents

Tell us if you would like to be thanked by name on the page.