Article · 2016
Characterization of Late Prehistoric Plasters and Mortars from Erimi - Laonin tou Porakou (Limassol, Cyprus)
F. Turco, P. Davit, F. Chelazzi, A. Borghi, L. Bombardieri and L. Operti
Archaeometry 58(2) 284-296
An archaeometric article on plasters and mortars from Erimi-Laonin tou Porakou, analysing their raw materials, production technology and uses in architectural features.
Turco and colleagues characterise the plasters and mortars of Erimi-Laonin tou Porakou, relating their composition and production to architectural features and to the site's two occupational phases, within its workshop and residential areas. The samples come from the 2011 and 2012 excavation campaigns and from floors, basin and bin coatings, emplacements, hearths and other contexts in Areas A and B. They are analysed by SEM–EDX, XRPD, optical petrography, FT–IR and TGA–DSC, with a sample of local calcareous soil for comparison.
The analyses find calcite and quartz and support the use of burnt local limestone, and Turco and colleagues argue that the materials were pyrotechnological lime products. Vegetable fibres occur in many coatings and other contexts, and the authors associate them with greater strength and less cracking; raphides and fibres are linked tentatively to plant use at the site. The authors read crushed ceramic in vessel emplacements as an addition to improve mechanical properties, rather than to make hydraulic mortar (pp. 288–295).
Phase B at Erimi is dated by the article to EC III–MC II, c. 2100–1750 BC, and Phase A to MC III–LC I A, c. 1750–1450 BC. Lime-based materials occur in samples from both phases. The results indicate continuity in the production process between them, while the ingredients varied with the function of each feature (pp. 285–295).
What it records
- Twenty-two plaster and mortar samples from different functional contexts and architectural features were collected in the 2011 and 2012 campaigns at Erimi-Laonin tou Porakou.p. 287
- Samples P24, P25b and P48 contain ceramic fragments at about 10% relative abundance by volume.p. 289
- Vegetable fibres in the samples measure 1–5 μm in diameter and usually exceed 50% by volume, estimated from SEM images.p. 291
- FT–IR v₂/v₄ ratios for the samples range from 3.7 to 4.4, against 3 for the local calcareous soil, the typical value for geological calcite.p. 292
- Turco and colleagues conclude that the binder in plasters and mortars from EC III to LC I A was made from local limestone.p. 294
- Two analysed mortar samples are classified by the authors as lime mortars and not hydraulic lime mortars, although their hydraulicity index values indicate weak hydraulicity.p. 294
Where to read
- Sample contexts and analytical methodspp. 287–288
- Aggregates, fibres and raphidespp. 290–292
- Pyrotechnology and ceramic additivespp. 292–295
Contents
- Introduction284
- Sampling and Analytical Techniques287
- Results and Discussion288
- Chemical and mineralogical composition288
- Technology of production290
- Aggregates and inclusions290
- Pyrotechnology292
- Hydraulicity292
- Conclusions294
- Acknowledgements295
- References295
People, places and institutions
Places
- Erimi-Laonin tou PorakouMiddle Bronze Age settlement under study
- Kouris Riverriver beside the site plateau
- Pakhna Formationgeological formation around the site
Also named: Sotira Kaminoudhia, Marki Alonia, Alambra Mouttes, Kalavassos Tenta, Khirokitia, Kissonerga Mosphilia, Missione Archeologica Italiana a Erimi – Laonin tou Porakou, Department of Antiquities of Cyprus.
Extent pp. 284–296, figs 1–5
Middle Bronze AgeEarly Bronze AgeLate Bronze AgeArchitectureTechnologyCraft ProductionLandscape and Climate
Corrections and additions
Know this document?
Help us cite it fully and point readers to a copy.
We would like to hear about
- The full citation, or a correction to ours
- Where a copy can be read or downloaded
- Missing parts, volumes or plates
- Related documents
Tell us if you would like to be thanked by name on the page.