Page 30Scan 28 of 147
Continued from p. 29
… only covered by a thin surface layer of pottery-poor earth. Ter I will be described later. — The 0-point for the horizontal measurements of the long section was fixed on the western side of Ter I, beside a strong wall, which sticks up into the surface and bounds Ter I toward the necropolis slopes. On the edge of the section, pegs were set out at every second metre, which were numbered from the 0-point. In this way the whole section will be treated. Thus all later descriptions and designations are made easier, all of which are referred to the number of metres from the above-mentioned 0-point. Ex: Ter II 27 Dj. 0,15 means Ter I 27 metres from the 0-point at a depth of 0,15 m. from the ground surface here.
15/10The work in the Theatre is continued and the section there is extended further. — From a point west of the large longitudinal section I on ter II a side trench was opened which at an oblique angle met Section I at. Here was exposed at … continues
65 figures hard to readstruck struck outadded written in above” jug ditto, and what it repeatsword reading not certain